Semi-insulating GaAs detectors with HDPE layer for detection of fast neutrons from D–T nuclear reaction

Bulk semi-insulating (SI) GaAs detectors optimized for fast-neutron detection were examined using mono-energetic neutrons. The detectors have an active area of 7.36 mm 2 defined by a multi-pixel structure of a AuZn Schottky contact allowing a relatively high breakdown voltage (300 V) sufficient for full depletion of the detector structure. The Schottky contact is covered by a HDPE (high density polyethylene) conversion layer, where neutrons transfer their kinetic energy to hydrogen atoms through elastic nuclear collisions. The detectors were exposed to mono-energetic neutrons generated by a deuterium (D)–tritium (T) nuclear reaction at a Van de Graaff accelerator. Neutrons reached a kinetic energy of 16.8 MeV when deuterons were accelerated by 1 MV potential. The influence of the HDPE layer thickness on the detection efficiency of the fast neutrons was studied. The thickness of the conversion layer varied from 50 [Formula: see text]m to 1300 [Formula: see text]m. The increase of the HDPE layer thickness led to a higher detection efficiency due to higher conversion efficiency of the HDPE layer. The effect of the active detector thickness modified by the detector reverse bias voltage on the detection efficiency was also evaluated. By increasing the detector reverse voltage, the detector active volume expands to the depth and also to the sides, slightly increasing the neutron detection efficiency.