Physical parameters of the violin bridge changed by active control

The physical parameters of a violin bridge have a significant influence on the tonal colouration of its sound. The resonance peaks of the bridge shape the response of the violin body. Reinicke and Cremer developed a simple bridge model that shows a typical broad frequency peak around 2.5kHz, because it incorporates the coupling to the violin body and the soundpost. By using the same model, Jim Woodhouse revealed the effect of some parameters of the bridge (mass, stiffness and foot spacing) on the instrument frequency response. Here the parameters of the violin resonance peaks are changed in real time, by applying an active control method. Such a technique, very useful in noise reduction, enabled to change separately the position and the shape of each peak of the bridge input admittance. On the bridge, 2 actuators and an accelerometer are placed at strategic positions in order to change the peak frequency and the damping factor values. The system behaviour is controlled by a Digital Signal Processor. Some sound results achieved with a real violin back up the theoretical equations.