English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Effects of tip clearance size and flowrate on the flow around the tip of an axial turbomachine rotor are studied experimentally. Visualizations and stereo-particle image velocimetry (PIV) measurements in a refractive index-matched facility compare the performance, leakage velocity, and the trajectory, growth rate, and strength of the tip leakage vortex (TLV) for gaps of 0.49% and 2.3% of the blade chord, and two flowrates. Enlarging the tip clearance delays the TLV breakup in the aft part of the rotor passage at high flowrates but causes earlier breakup under pre-stall conditions. It also reduces the entrainment of endwall boundary layer vorticity from the separation point where the leakage and passage flows meet. Reducing the flowrate or tip gap shifts the location of the TLV detachment from the blade suction side (SS) upstream to points where the leakage velocity is 70–80% of the tip speed. Once detached, the growth rates of the total shed circulation are similar for all cases, i.e., varying the gap or flowrate mostly shifts the detachment point. The TLV migration away from the SS decreases with an increasing gap but not with the flowrate. Two mechanisms dominate this migration: initially, the leakage jet pushes the TLV away from the blade at 50% of the leakage velocity. Further downstream, the TLV is driven by its image on the other side of the endwall. Differences in migration rate are caused by the smaller distance between the TLV and its image for the narrow gap, and the increase in initial TLV strength with decreasing flowrate and gap.

On the Effects of Tip Clearance and Operating Condition on the Flow Structures Within an Axial Turbomachine Rotor Passage