The Backus–Gilbert approach to the 3‐D structure in the upper mantle – II. SH and SV velocity

Summary. Phase velocity variations obtained in the previous paper are inverted by the Backus–Gilbert method for the velocity structure of the upper mantle. Spheroidal modes and toroidal modes in the period range of 125–260 s are used in the inversion. The data cannot constrain all six parameters in a transversely isotropic medium and we chose to perturb only two parameters, SH and SV velocities. SV velocities are resolved between the depths of about 200 and 400 km and SH velocities between 0 and 200 km. Resolution kernels have half‐peak widths of about 200–300 km in depth, becoming broader for deeper target depths. SV velocity kernels show secondary peaks near the surface of the Earth, with widths varying from 50 to 100 km. The deeper the target depths, the wider the secondary peaks near the surface. SH velocity kernels do not possess such secondary peaks. The trade‐off between SV and SH velocities is small. SV velocity is essentially determined by spheroidal modes and SH velocity by toroidal modes. Because of the broad width of the resolution kernels, the structure in the resolved region is difficult to detect from our data set; for example the differences in SV velocity structure between 250 and 350 km or the differences in SH velocity between 100 and 200 km are difficult to distinguish. Considering the horizontal resolution of about 2000 km, obtained in the previous paper, averaging kernels for 3‐D structure are quite elongated in the horizontal dimension.