English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

In the present study, a bionic flapping mechanism of a spatial six-bar configuration was designed to transform a single rotation of a motor into a three degrees of freedom “flapping–twist–swing” cooperative motion of a flapping wing. The kinematics model of the flapping mechanism movement was constructed. The flapping trajectory of the wing based on the kinematics model was to mimic the motion of a pigeon wing in landing flight. To reduce the manufacturing complexity, the flapping mechanism was simplified with only two degrees of freedom (flapping and twist) retained. Finally, a prototype model with a 0.9 m wing span was built and tested. A comparison among the experimental data, theoretical calculation results, and ADAMS simulation results revealed that the difference in the flapping and the twist amplitude between experimental observations and theoretical calculation results was 12.5% and 2.3%, respectively. This was owing to the elastic deformation of the bar and the mechanism simplification. The comparison results also indicated that the maximum difference in the inertial force was 5.9% in up-stroke and 6.7% in down-stroke, respectively. The experimental results showed that the inertial force of the model with the wing patagium was approximately 2.2 N, and the maximum positive and negative lift was 2.1 N and −1.5 N, respectively. It is hoped that this study can provide guidance for the design of bionic flapping wing mechanisms of a flapping wing aircraft for short landing flight.

Design and experiment of a bionic flapping wing mechanism with flapping–twist–swing motion based on a single rotation