Welding fixture design for the production of cross-flow turbine runner

The industrial sectors in Indonesia is currently growing very rapidly because it is supported by the development of technology in the field of manufacturing. One of the most frequently used machining operations in the manufacturing industry is welding operations. Welding operation is the most efficient and efficient method to combine two or more metal components. The product quality of welding can be obtained by using the production tool (fixture). The purpose of this research is to improve the quality of turbine runner product by using the welding fixture. The method was to design and make welding fixture of turbine runner welding, test the concentricity, straightness of the dish, the stability of the dish to the shaft, and the alignment of the blades to the shaft, and to analyze the deviation of measurement results. Based on the result of welding fixture design of cross-flow turbine runner component, a prototype welding fixture which can facilitate the assembling process of cross-flow turbine runner component was obtained. The conclusions of this research were: 1) The quality of the cross-flow turbine runner product can be increased along with the small geometrical deviation on cross-flow turbine runner using accelerator tool, 2). The maximum deviation of the runner disc placement to the axis of the axis on the 300mm diameter runner is 1.2mm and the runner of 200mm with diameter of 0.68mm, and 3). The assembling time of the turbine runner components is shorter using weld assembly tools with better accuracy.The industrial sectors in Indonesia is currently growing very rapidly because it is supported by the development of technology in the field of manufacturing. One of the most frequently used machining operations in the manufacturing industry is welding operations. Welding operation is the most efficient and efficient method to combine two or more metal components. The product quality of welding can be obtained by using the production tool (fixture). The purpose of this research is to improve the quality of turbine runner product by using the welding fixture. The method was to design and make welding fixture of turbine runner welding, test the concentricity, straightness of the dish, the stability of the dish to the shaft, and the alignment of the blades to the shaft, and to analyze the deviation of measurement results. Based on the result of welding fixture design of cross-flow turbine runner component, a prototype welding fixture which can facilitate the assembling process of cross-flow turbine runner com...