An experimentally validated and parameterized periodic unit-cell reconstruction of open-cell foams

The physical behavior of open-cell foams depends on their microscopic structure. An open-cell geometrical model is proposed, which can serve as the basis for a future macroscopic analysis. The strut geometry is of particular interest, as it is reported to have substantial influence on the occurring thermo-hydraulic and mechanical phenomena. Axial strut size variation, as well as the porosity dependence of shape is quantified and included in a geometrical model. The foam is generated by placing the struts on an elongated tetrakaidecahedron. The required input parameters for the model are two cell dimensions, corresponding to the mean transverse and conjugate diameters of the ellipse encompassing a cell, and the strut cross-sectional surface area at its midpoint between two nodes. The foam geometry is generated iteratively, as porosity is used as validation. A high resolution micro-computed tomography scan is performed to measure the three parameters, the resulting porosity and surface-to-volume ratio. This allows to validate the model. The predictions are found to be within measurement accuracy. A numerical implementation of the model in the preprocessor of a commercial CFD package is demonstrated.RRR/Radiation, Radionuclides and ReactorsApplied Science