Open AccessPreparation and Laser Marking Properties of Poly(propylene)/Molybdenum Sulfide Composite Materials
Author(s) -
Zheng Cao,
Gang Lu,
Hongxin Gao,
Zhiyu Xue,
Keming Luo,
Kailun Wang,
Jiping Cheng,
Qingbao Guan,
Chunlin Liu,
Ming Luo
Publication year - 2021
Publication title -
acs omega
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.779
H-Index - 40
ISSN - 2470-1343
DOI - 10.1021/acsomega.1c00255
Subject(s) - materials science , scanning electron microscope , laser , composite number , composite material , carbonization , raman spectroscopy , fourier transform infrared spectroscopy , optical microscope , energy dispersive x ray spectroscopy , chemical engineering , optics , physics , engineering
In this study, using molybdenum sulfide (MoS 2 ) as laser-sensitive particles and poly(propylene) (PP) as the matrix resin, laser-markable PP/MoS 2 composite materials with different MoS 2 contents ranging from 0.005 to 0.2% were prepared by melt-blending. A comprehensive analysis of the laser marking performance of PP/MoS 2 composites was carried out by controlling the content of laser additives, laser current intensity, and the scanning speed of laser marking. The color difference test shows that the best laser marking performance of the composite can be obtained at the MoS 2 content of 0.02 wt %. The surface morphology of the PP/MoS 2 composite material was observed after laser marking using a metallographic microscope, an optical microscope, and a scanning electron microscope (SEM). During the laser marking process, the laser energy was absorbed and converted into heat energy to cause high-temperature melting, pyrolysis, and carbonization of PP on the surface of the PP/MoS 2 composite material. The black marking from carbonized materials was formed in contrast to the white matrix. Using X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and Raman spectroscopy, the composite materials before and after laser marking were tested and characterized. The PP/MoS 2 composite material was pyrolyzed to form amorphous carbonized materials. The effect of the laser-sensitive MoS 2 additive on the mechanical properties of composite materials was investigated. The results show that the PP/MoS 2 composite has the best laser marking property when the MoS 2 loading content is 0.02 wt %, the laser marking current intensity is 11 A, and the laser marking speed is 800 mm/s, leading to a clear and high-contrast marking pattern.