Low-Temperature Plasma-Assisted Atomic-Layer-Deposited SnO2 as an Electron Transport Layer in Planar Perovskite Solar Cells

In this work, we present an extensive characterization of plasma-assisted atomic-layer-deposited SnO 2 layers, with the aim of identifying key material properties of SnO 2 to serve as an efficient electron transport layer in perovskite solar cells (PSCs). Electrically resistive SnO 2 films are fabricated at 50 °C, while a SnO 2 film with a low electrical resistivity of 1.8 × 10 -3 Ω cm, a carrier density of 9.6 × 10 19 cm -3 , and a high mobility of 36.0 cm 2 /V s is deposited at 200 °C. Ultraviolet photoelectron spectroscopy indicates a conduction band offset of ∼0.69 eV at the 50 °C SnO 2 /Cs 0.05 (MA 0.17 FA 0.83 ) 0.95 Pb(I 2.7 Br 0.3 ) interface. In contrast, a negligible conduction band offset is found between the 200 °C SnO 2 and the perovskite. Surprisingly, comparable initial power conversion efficiencies (PCEs) of 17.5 and 17.8% are demonstrated for the champion cells using 15 nm thick SnO 2 deposited at 50 and 200 °C, respectively. The latter gains in fill factor but loses in open-circuit voltage. Markedly, PSCs using the 200 °C compact SnO 2 retain their initial performance at the maximum power point over 16 h under continuous one-sun illumination in inert atmosphere. Instead, the cell with the 50 °C SnO 2 shows a decrease in PCE of approximately 50%.