z-logo
open-access-imgOpen Access
Comparative Study on the Formation of Toxic Species from 4-chlorobiphenyl in Fires: Effect of Catalytic Surfaces
Author(s) -
Song Hou,
John C. Mackie,
Eric M. Kennedy,
Bogdan Z. Dlugogorski
Publication year - 2013
Publication title -
procedia engineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.32
H-Index - 74
ISSN - 1877-7058
DOI - 10.1016/j.proeng.2013.08.075
Subject(s) - chemistry , gas chromatography , mass spectrometry , naphthalene , polychlorinated dibenzofurans , catalysis , fourier transform infrared spectroscopy , chromatography , environmental chemistry , nuclear chemistry , organic chemistry , chemical engineering , engineering
This contribution compares the formation of toxic species, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/F) and their precursors such as polychlorobenzenes (PCBz) and polychlorophenols (PCP), during oxidation of 4-chlorobiphenyl (4-CB) in a laboratory-scale apparatus, under conditions similar to those that occur in fires and waste combustion. The experiments were conducted using two gas flow reactors made of 99.5% alumina and high purity quartz, respectively. A sampling system intercepted the gaseous products leaving the reactors, trapping the volatile organic compounds (VOC; i.e., PCBz and PCP) and PCDD/F on a XAD-2 cartridge. The analysis of VOC involved high resolution gas chromatography (HRGC) – quadrupole mass spectrometry (QMS) while HRGC – ion trap (IT) MS/MS quantitated the PCDD/F produced. For the experiments using the alumina reactor, VOC analysis revealed the formation of PCBz and PCP, commencing at temperatures as low as 400°C. Other products included benzaldehyde, naphthalene, 3- ethylbenzaldehyde, 1-chloro-4-ethynylbenzene and benzofuran. Gaseous species such as CO, CO2 and HCl were detected and quantitated either by Fourier transform infra-red spectroscopy (FTIR) or ion chromatography (IC). Similar products were found to form in the quartz reactor, however, their formation commenced at 500°C, with their yields significantly lower than those found for the alumina reactor. The present measurements indicate that surface reactions govern the oxidation of 4-CB between 300 and 650°C for the alumina reactor, and between 450 and 600°C for the quartz reactor. At 700°C, both reactors operate similarly, with the oxidation process dominated by the gas phase reactions. With respect to dibenzo-p-dioxins and dibenzofurans, only isomers of chlorinated monochlorodibenzofuran (MCDF) and chlorinated dichlorodibenzofuran (DCDF) were found at low temperatures (300 to 450°C), with 3-MCDF as the dominant congener. In our system, they appear to form in gas phase reactions involving 4-CB and singlet oxygen (1Δg O2), the latter generated on the reactor walls. The present results indicate that the combustion of 4-CB in fires will be dominated by catalytic surfaces of fly ash below 600°C, and by gas-phase kinetics above 700°C

The content you want is available to Zendy users.

Already have an account? Click here to sign in.
Having issues? You can contact us here
Accelerating Research

Address

John Eccles House
Robert Robinson Avenue,
Oxford Science Park, Oxford
OX4 4GP, United Kingdom