Premium
A statistical analysis of pores and microcracks in nuclear graphite
Author(s) -
Huang Qing,
Tang Hui
Publication year - 2022
Publication title -
surface and interface analysis
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.52
H-Index - 90
eISSN - 1096-9918
pISSN - 0142-2421
DOI - 10.1002/sia.7013
Subject(s) - graphite , nuclear graphite , polishing , materials science , microstructure , scanning electron microscope , transmission electron microscopy , porosity , raman spectroscopy , composite material , irradiation , ion , nanotechnology , chemistry , optics , physics , organic chemistry , nuclear physics
Microstructure characterization is of great value to understanding nuclear graphite's properties and irradiation behavior. However, graphite is soft and could be easily damaged during sample preparation. A three‐step polishing method involving mechanical polishing, ion milling, and rapid oxidation is proposed for graphite. Ion milling is adopted to remove the broken graphite pieces produced by mechanical polishing. Rapid oxidation is then adopted to remove irradiation‐induced damage layer during ion milling. The Raman spectra show very small G peak width and very low I D / I G ratio after rapid oxidation. The microcracks that were conventionally observed via a transmission electron microscope can be observed on rapid‐oxidized surface in a scanning electron microscope. By digital image processing, the microcracks along with the gas‐escape pores in nuclear graphite IG‐110 are statistically analyzed. Porosity's distributions on crack (pore) size (spanning from 10 nm to 100 μm) are given, which could help to understand and simulate graphite's performances in reactors.