Premium
Back‐Contacted Carrier Injection for Scalable GaN Light Emitters
Author(s) -
Kim Iurii,
Kauppinen Christoffer,
Radevici Ivan,
Kivisaari Pyry,
Oksanen Jani
Publication year - 2022
Publication title -
physica status solidi (a)
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.532
H-Index - 104
eISSN - 1862-6319
pISSN - 1862-6300
DOI - 10.1002/pssa.202100461
Subject(s) - light emitting diode , optoelectronics , materials science , electroluminescence , doping , fabrication , diode , gallium nitride , nanotechnology , layer (electronics) , medicine , alternative medicine , pathology
It has recently been proposed that back‐contacted III–V light‐emitting diodes (LEDs) could offer improved current spreading as compared to conventional mesa or double side contacted structures. This has inspired also experimental efforts to realize such structures, but fabrication methods for them have not yet been fully established. Herein, the use of unintentionally doped and partially carrier‐selective contacts (SC) is studied to realize back‐contacted indium gallium nitride (InGaN) LEDs. The sharp electroluminescence peak at 439 nm from the multiquantum well stack demonstrates that the approach allows fabricating back‐contacted InGaN LEDs without intentionally doped n‐GaN layers and without inflicting damage in the active region, often observed in alternative approaches relying on lateral doping and the use of high energy particles during fabrication. The samples are fabricated on a finger configuration with several finger widths between 1 and 20 μm. It is observed that the emission spreads most uniformly throughout the structure for fingers with the width of 5 μm. As shown by the simulations, with improved contact resistances, the structures reported herein could enable fabricating back‐contacted LEDs with unity injection efficiency and improved current spreading, offering a path toward large‐area LEDs without contact shading even in materials where n‐doping is elusive.