English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

This study focuses on preventing scale formation in hard waters by controlled electrode-position of Ca2+ and Mg2+ on a stainless-steel cathode at constant applied current intensity. The influence of the anode material, BDD or Ti/Pt/PbO2, cathode active area, stirring speed, and applied anodic current intensity on the inorganic carbon (IC), Ca2+, and Mg2+ removal was investigated. Assays were performed with model hard water solutions, simulating Bounouara (Algeria) water. The scaling inhibiting properties of the treated water were followed by measuring IC, calcium, and magnesium concentrations and chronoamperometric characterization of the treated solutions. The influence of the Ca/Mg molar ratio on the inorganic carbon removal by electrolysis was also evaluated, utilizing model solutions with different compositions. It was found that an increase in stirring speed or cathode geometric area favors IC and Ca2+ and Mg2+ removal rates. The applied current intensity was varied from 0.025 to 0.5 A, and the best results were obtained for 0.1 A, either in IC and Ca2+ and Mg2+ removals or by the accelerated scaling tests. However, energy costs increase with applied current. The deposit formed over the cathode does not seem to influence posterior deposition rate, and after eight consecutive assays, the solid deposition rate was kept constant. Ca/Mg ratio influences IC removal rate that increases with it. The results showed that hard-water scaling phenomena can be prevented by solid electrodeposition on the cathode at applied constant current.

Electrodeposition of Calcium Carbonate and Magnesium Carbonate from Hard Water on Stainless-Steel Electrode to Prevent Natural Scaling Phenomenon