English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Open

The present study deals with the sound absorption performance of natural fibres from the oil palm frond (OPF), mainly considered agricultural waste. Therefore, this study aimed to investigate the sound absorption performance of OPF fibre-reinforced composite under normal incidence sound. The materials used were OPF particles and urea-formaldehyde was used as an adhesive. The particleboards were produced with three particle sizes and four target densities. The absorption coefficient of normal incidence sound (α n ) was tested using an impedance tube. The effects of particle size and bulk density were also evaluated. The findings reveal thatα n exceeded 0.45 at 1000 Hz and could reach 0.95 above 3.3 kHz. This occurred when the bulk density of the OPF composite particleboards ranged between 0.3-0.4 g/cm 3 , and the particle size varied between medium to coarse. The results also indicated that the absorption frequency and the degree of α n significantly increased as the bulk density decreased. Therefore, OPF fibres can be used to create sound-absorbing composite particleboards.

Influence of Particle Size and Bulk Density on Sound Absorption Performance of Oil Palm Frond-Reinforced Composites Particleboard