English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

The influence of preaging (PA) treatments on the bake hardening (BH) response of a AlZnMgCuZr aluminum alloy which served as automotive body structures were studied in this paper. A novel two-step PA treatment was particularly designed and further employed. The mechanical properties of the alloy were tested in detail. The microstructure was characterized by optical microscope (OM), transmission electron microscopy (TEM) and 3D measuring laser microscope (3D–MLM). Meanwhile, the corrosion behavior was investigated by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization. The results indicated that the PA treatment was beneficial for the improvement of BH response after baking at 180 °C immediately after the solution treatment and the micro-hardness reached the peak value (194 HV) after 10 h holding, which had a percentage improvement of 110.87% compared to the hardness under the solution condition. The PA treatments decreased natural aging (NA) adverse effects, while it had the lowest NA effect and optimal BH response under 120 °C/20 min. Such a novel two-step PA treatment was revealed further to decrease the NA effect and increase the BH response compared to the optimal PA treatment, in particular, the BH value could reach 168 MPa and was 21.7% higher than that of optimal PA + NA treatment. The optimal corrosion resistance has been shown up by the combined characterizations of potentiodynamic polarization curves, EIS Nyquist plots, and 3D–MLM images.

Influence of Preaging Treatment on Bake-Hardening Response and Electrochemical Corrosion Behavior of High Strength Al-Zn-Mg-Cu-Zr Alloy