English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

In the present study, the fatigue crack growth (FCG) behavior of short surface cracks in a fine-grained cemented carbide with a length of less than 1 mm was investigated. The rotating bending and the four-point bending fatigue tests were carried out at stress ratios of R = −1 and R = 0.1 (R = maximum stress/minimum stress). It was found that a short surface crack had a longer stable fatigue crack growth area than a long through-thickness crack; the FCG behaviors of the two types of crack are clearly different. Furthermore, the FCG path of short surface cracks was investigated in detail to study the interaction between fatigue cracks and microstructures of the cemented carbide such as WC grains and the Co phase. At a low Kmax (Kmax = the maximum stress intensity factor), it was found that fatigue crack growth within WC grains is difficult because of a small driving force; instead, crack growth is along the brittle WC/WC interface. On the other hand, at a high Kmax, WC grain breakage often occurs, since the driving force of FCG is large, and the fatigue crack grows linearly

On the Short Surface Fatigue Crack Growth Behavior in a Fine-Grained WC-Co Cemented Carbide