English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Open

Film cooling as applied to rocket nozzles is analyzed numerically with emphasis on the assessment of the effect of the mixing of coolant with the hot stream. Cooling performance, as characterized by cooling effectiveness, is studied for three different coolants in the three-dimensional, turbulent flow field of a supersonic convergent-divergent nozzle operating with a hot stream temperature of 2500 K over a range of blowing ratios. The coolant stream is injected tangentially into the mainstream using a diffuser-type injector. Parameters influencing the effectiveness, such as coolant injector configuration and mixing layer, are analyzed. Thermal and species mixing between the coolant and the mainstream are investigated with regard to their impact on cooling effectiveness. The results obtained provide insight into the film cooling performance of the gases and the heat transfer characteristics associated with these three gases. An injector taper angle of 30° results in the most effective cooling among the configurations considered (0°, 15°, 30° and 45°). Mixing of the coolant with the hot stream is examined based on the distributions of velocity, temperature and species. The higher values of cooling effectiveness for Helium are attributed to its thermophysical properties and the reduced rate of mixing with the hot stream. The results further indicate that through optimization of the blowing ratio and the coolant injector configuration, the film cooling effectiveness can be substantially improved.

Enhancement of Film Cooling Effectiveness in a Supersonic Nozzle