English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Flow patterns exert a fundamental influence on the behaviour of multiphase flows, and they must be brought into play when dealing with their modelling. This is usually done by means of summarizing quantities as the phase holdups and the interfacial area concentration. Many techniques have been designed during the years to measure them, among which the use of probes relying on electrical resistance is one of the simplest and less expensive. While having these points of strength, resistive probes are intrusive devices. This work is therefore devoted to a comparison between liquid height (and derived quantities) measurements – for stratified and stratified-wavy air-water flows – performed using a conventional resistive probe and by means of an image-based technique. Validation of the latter was performed using computer-generated flow images. Then, an experimental campaign was carried out for flows with liquid superficial velocities in the range 0.03 ÷ 0.06 m/s and gas superficial velocities in the range 0.77 ÷ 2.31 m/s. Results showed that the two methods give answers within very few percent of difference, which is more than satisfactory in this field. The results are also in good agreement with some of the most credited literature models and correlations.

Liquid holdup measurement for gas-liquid stratified flows by means of resistive probes and image processing