English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Co-base superalloys generally have high strength, good oxidation- and corrosion-resistance, as well as excellent creep-resistant properties at high temperatures (HTs), which is ascribed to the coherent precipitation of cuboidal γ' phase into face-centered-cubic (FCC) γ matrix induced by co-alloying of multiple elements. However, the cuboidal γ/γ' coherent microstructure is liable to be destabilized after a long-time aging at HTs in Co-base superalloys. The present work applied the cluster formula approach to design a series of low-density Co-base superalloys with the composition of[Al-(Co 8 Ni 4 )]((Al 0.5 (Ti/Nb/Ta) 0.5 Mo 0.5 )(Mo 0.5 Cr 0.5 Co 0.5 )) (=Co 8.5 Ni 4 Al 1.5 Mo 1.0 Cr 0.5 (Ti/Nb/Ta) 0.5 ). Alloy ingots were prepared by arc melting under an argon atmosphere, and were solid-solutionized at 1300℃ for 15 h and then aged at 900℃ for up to 500 h. Microstructural characterization and mechanical properties of these alloys in different aged states were carried out using XRD, SEM, EPMA, TEM, and HV. It is found that all these alloys with Ti/Nb/Ta, Ti/Nb, and Ti/Ta in an equi-molar mixing have a special coherent microstructure with cuboidal γ' phase uniformly-precipitated into the γ matrix, which is contributed to the moderate lattice misfit of γ/γ' (0.27~0.34%). Moreover, these cuboidal γ' phase are coarsened slowly during aging, in which the microhardness does not vary obviously with aging time (275~296  HV ). Especially, the alloy with (Ti/Ta) 0.5  exhibits the highest γ/γ' microstructural stability with a slow coarsening rate after aging 500 h, and no other second phases appear near the grain boundaries. While needle and bulk particles would precipitate on grain boundaries in other alloys after 500 h-aging.

wuli xuebao

Design of cuboidal&lt;i&gt; γ&lt;/i&gt;/&lt;i&gt;γ′&lt;/i&gt; coherent microstructure and its stability in low-density Co-Ni-Al-Mo-Cr-Ti/ Nb/Ta superalloys