English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

It is well known that hot-rolled microalloyed steels derive their overall strength from different strengthening mechanisms that simultaneously operate, such as: solid solution strengthening, hardening by the grain size refinement, precipitation strengthening and transformation induced dislocation strengthening [1]. Precipitation of fine carbonitride particles during thermomechanical processing has been used for many years to improve the mechanical properties of the microalloyed steels, where very small amounts (usually below 0.1 wt%) of strong carbide and nitride forming elements such as niobium, titanium and/or vanadium are added for grain refinement and precipitation strengthening. Both grain refinement and precipitation strengthening in microalloyed steels depend upon the formation of fine carbonitride particles, of about 10 nm or less in diameter, which may form in austenite during hot rolling, along the γ/α interface during the austenite to ferrite transformation ( interphase precipitation), or as semicoherent particles in ferrite during final cooling. Each one of these basic precipitation modes will lead to its own characteristic particle distribution, and to generally different effects on steel properties [2]. First systematic investigations on microalloyed steels were carried out in the early sixties at the University of Sheffield [3,4], including initial observations of carbonitride particles by transmission electron microscopy (TEM). According to the early literature on niobium steels yield strength contribution of about 100 MNm-2could be obtained in the as rolled condition due to the presence of fine carbonitride particles, which were observable in the TEM [5]. Even larger contributions of up to 200 MNm-2 were reported for niobium/vanadium [6] and titanium steels [7]. In principle, these experimental results appeared to be in good agreement with theoretical predictions, based upon the Orowan-Ashby model of precipitation strengthening with carbonitride particles of about 3 nm in diameter [7,8].

Comments About the Strengthening Mechanisms in Commercial Microalloyed Steels and Reaction Kinetics on Tempering in Low-Alloy Steels