English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

<p>The finite element approach was used in the simulation analysis to solve many engineering problems. One of the accuracy factors of this method is dependent on the choice of appropriate element size or mesh discretization. Good mesh discretization can reduce the percentage of error; avoid the computation time approaches to non-practical limits and furthermore, produces the optimal results. The purpose of this study is to identify the best size of mesh elements to be used in the problem analysis using the AUTODYN numerical simulation. The fully clamped circular plate subjected to blast load as per experimental setup was modified and simplified in the two-dimensional (2D) simulation model; it will be seen as a clamped beam at both edges. Plate model were discretized to form nodal and element. The deformation or deflection result found to converge at certain value by increasing the total number of element discretization. Assumed that the deformation results were accurate at the converged state; it will be taken as reference to choose the finest size of mesh element. In this study, several mesh sizes been considered, and the appropriate optimum mesh discretization obtained at range of 0.5 mm to 1 mm.</p

The Effect of Mesh Sizing Toward Deformation Result in Computational Dynamic Simulation for Blast Loading Application