English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

<p class="MsoBodyText" style="text-align: justify; margin: 0cm 0cm 0pt;">In this study, continuous wave CO<sub>2</sub> laser with 1.7 and 2 kW were used to deposit clad layers of premixed powders of either Ni-10 wt% Al or Ni-30 wt% Al onto inconel 617 substrate. Different cladding traverse speeds in the range 1 to 35 mm/s were used for premixed clad powder of Ni-10 wt% Al and 1.65 to 11.2 mm/s for premixed clad powder of Ni-30 wt% Al. Two powder feeding rates were used, 10 and 8.9 gm/min for premixed clad powders of Ni-10 wt% Al and Ni-30 wt% Al respectively. The other laser independent variables were selected to be constant. The results showed that different percentages of area dilution were found ranging from 3.7 to 78.3% for premixed clad powder of Ni-10 wt% Al and 6.9 to 41 % for premixed clad powder of Ni-30 wt% Al depending on the laser cladding independent variables used. Furthermore, dilution was affected mainly by cladding traverse speeds.</p

Dilution Effect during Laser Cladding of Inconel 617 with Ni-Al Powders