English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Investigation on the effect of mesh density on the analysis of simple support bracket was conducted using Finite element analysis simulation. Multiple analyses were carried out with mesh refinement from coarse mesh of 3.5 mm to a high-quality fine mesh with element size of 0.35 mm under 15 kN loading. Controlled mesh analysis was also conducted for the same loading. At the mesh size of 0.35 mm, it has a maximum stress value of 42.7 MPa. As the element size was reduced, it was observed that below 1.5 mm (higher mesh density) there was no significant increase in the peak stress value; the stress at this level increased by 0.028 % only. Further decreased of mesh size shows insignificant effect on the stresses and displacements for the high-quality fine mesh analysis. The application of High-quality mesh control analysis showed a significant reduction in the computation time by more than 90%. Regardless of the reduction in computation time, the controlled mesh analysis achieved more than 99% accuracy as compared to high-quality fine mesh analysis. Keywords— Computation time, Finite Element Analysis, Mesh density, Support Bracket.

Effect of Mesh Density on Finite Element Analysis Simulation of a Support Bracket