English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Pro

Presents the zaia usage as premium feature

ZAIA

Presents AI Discovery search usage as a premium feature

AI Discovery

Presents AI Discovery explain and summary usage as a premium feature

Content Analysis

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Presents the pdf analysis as premium feature

PDF Analysis

1500 Top-up

3000 Top-up

Zendy Basic

2500 Top-up

Zendy Unlimited

Presents the access of premium content as premium feature

Premium Content

Objectives:A paper filter was prepared by pitch based activated carbon fibers to investigate the removal efficiency of toxic gas. Also, changes in pore characteristics and mechanical properties according to the ratio of the adsorbent and the binder were observed to optimize the decrease in specific surface area and micropore, which are the unique characteristics of activated carbon fibers. In addition, it is intended to establish optimized paper filter derived activated carbon fiber manufacturing conditions through evaluation of toxic gas removal characteristics.Methods:The pore characteristics of the activated carbon fiber and prepared paper were analyzed by measuring the BET specific surface area, and SEM analysis was performed on the fine surface shape. Tensile strength and air permeability were performed according to ISO 1924-2 and ASTM D737: 04, respectively. The adsorption performance of the prepared filter was evaluated as a gas removal efficiency using a gas detection tube (GV-110S).Results and Discussion:As the content of the binder increased in the paper manufacturing process, it was confirmed that the specific surface area of the prepared filter decreased by up to 39.5% compared to the activated carbon fiber. It is considered that the micropores were closed because the surface of the activated carbon fiber was coated with the excessive addition of the binder. The removal efficiency showed a removal rate of 90% of ammonia, and methyl mercaptan and hydrogen sulfide showed a removal rate of about 60%. This result might be due to the difference in the physical adsorption rate according to the vapor pressure of each material.Conclusions:An activated carbon fiber-based paper filter for removing of toxic gas was prepared. It was confirmed that the mixing ratio of the adsorbent and the binder was an important process parameter for determining moldability and adsorption performance. Finally, optimum condition was selected as weight ratio condition of 8:2.

Removal Characteristics of Toxic Gas on Activated Carbon Fiber Based Paper Filter