English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

There are numerous aspects and questions related to the use of composite materials for primary structures in aircraft where the structural integrity is the most important factor. This is especially true if the main concerns are that the material should have good reliability and durability for the primary structural application. Composite laminates are highly sensitive to out-of-plane failure due to their low inter laminar fracture toughness. An alternate method to increase the damage resistance is through three-dimensional fibrous reinforcement such as through-the-thickness stitching with a single fiber as the thread. Recent studies have shown that the stitching of standard laminates can enhance damage tolerance to levels obtainable with toughened resin systems. However, for next-generation aircraft, material improvement alone is not enough to assure or increase the safety and reliability of the structure. Continuous damage monitoring during operation will become an important issue in aircraft safety. Embed ding fiber Bragg grating (FBG) technology into the composite structure as strain sensors could potentially solve the above problem because the FBG can be used to detect and characterize the damage before it reaches a critical stage. The model used to represent this problem is a 6 × 6 Vectran stitched carbon/ epoxy laminate under tension loading, and the real-time monitoring using the FBG strain sensors is combined with acoustic emissions that were conducted during the test. A numerical laminate theory using a rebar element and first-ply failure criterion is performed to determine the preferred area on the specimen for the placement of the FBG before manufacturing and testing. Experiments are presented to determine the damage growth that was quantified with an ultrasonic (water immersion) c-scan. In this research, the FBG successfully detected and characterized the damage in the carbon/epoxy stitch laminate caused in tension loading cases. The FBG is enhanced with acoustic emission data and can quantitatively predict the damage growth.

Automatic Damage Detection and Monitoring of a Stitch Laminate System Using a Fiber Bragg Grating Strain Sensor