English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Open

Safety assessments of cross-wind influence on high-speed train operation require a detailed investigation of the aerodynamic forces acting on a vehicle. European norm 14067-6 permits the derivation of required integral force and moment coefficients by experiments as well as by numerical simulation. Utilizing the DLR’s Next Generation Train 2 model geometry, we have performed a case study comparing simulations with varying turbulence modeling assumptions. Because of its relevance for actual design, a focus lies on steady RANS computations, but more expensive unsteady RANS (URANS) and delayed detached eddy simulations (DDES) have also been carried out for comparison. Validation data for the exact same model configuration and moderate Reynolds numbers 250,000 and 450,000 is provided by side wind tunnel experiments. Particular emphasis is laid on simulating a yaw angle of 30°, for which a major vortex system on the leeward side of the train leads to sizeable uncertainties in predicted integral coefficients. At small to intermediate wind angles the flow remains attached and absolute errors in integral quantities decline with decreasing yaw angles. However, a consistent relative difference to the experimental results greater than 10% raises doubts about the general reliability of CFD methods, that are not capable of capturing laminar-turbulent transition, which is observed for scaled models in industry type wind tunnel experiments

Comparison of Industrial and Scientific CFD Approaches for predicting Cross Wind Stability of the NGT2 Model Train Geometry