English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

W-Cu composite and 1Cr18Ni9 steel were brazed with Ni-based amorphous filler metal in a vacuum furnace. Four-point bending strength, fracture morphology, microstructure and elements distribution were studied by a series of standard methods. Then the influence of brazing clearance on microstructure and properties of the brazed joint were analyzed and discussed. Results indicated that, within the scope of the selected parameters, bending strength of the brazed joint increased significantly as reducing the brazing clearance. While the brazing clearance controlled to be 20 μm, the four-point bending strength performed the largest value, up to 333 MPa. The joint fracture showed a typical ductile fracture characteristics. Microstructure of the brazing seam was mainly composed of γ-Ni solid solution, W-Ni solid solution, CrB, and a part of eutectic phases of Ni3Si and Ni3B. The microstructure of brazed joint with brazing clearance 20 μm was more uniform and more stable. Microstructure and element of brazed joint almost transformed into single-phase solid solution. Meanwhile, micro holes disappeared and a number of brittle phases reduced, which provided well plastic reserves for the brazed joint. K e y w o r d s: W-Cu composite, brazing clearance, microstructure, fracture, bending strength

Influence of brazing clearance on microstructure and properties of W-Cu/1Cr18Ni9 steel brazed joint with Ni-Cr-Si-B amorphous filler metal