English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

Additive manufacturing methods hold several advantages over standard semiconductor fabrication techniques such as the reduction of hazardous waste, the reduction of fabrication steps and the elimination of mask sets. For prototyping, low volume manufacturing and custom parts, additive manufacturing has the potential to dramatically reduce both the time and cost of fabrication. As a demonstration of the capabilities of additive manufacturing, a ‘2-layer’ power supply circuit board was fabricated using aerosol-jet printing. Silver nanoparticle ink was used to print the conducting layers and polyimide was used to print the dielectric layer. Each layer was printed separately and sintered/cured for at least 90 minutes up to a temperature of 255 °C. For an initial proof of concept, a power supply circuit was selected, providing three different voltage outputs. In order to supply the necessary current while minimizing topology, the metal traces were designed to be as wide as possible while staying within a 16 × ...

Multi-layer PC boards Fabricated using Aerosol-jet Printing