English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Kenaf is a nonwoody fibrous plant, and its fibre can be potentially used as a reinforcement in the matrix to produce biocomposite materials. The properties of biocomposite materials are highly dependent on the reinforcing material and the matrix used as a binder. This study used kenaf fibre as a reinforcing material with different compositions (10, 20, and 30 wt.%) and different fibre lengths (1 cm and 3 cm) in the matrix using the casting process. Low viscosity epoxy resin (635 thin epoxy resin) with a viscosity of 6 poise was used as the matrix. The results showed that the highest flexural strength, impact strength and shore hardness were obtained at a 30 wt.% kenaf fibre composition with a 1-cm kenaf fibre length, namely, 85 MPa, 338 KJ/m2 and 98 SHD, respectively. The length of the fibre in the matrix affects the mechanical properties of the resulting biocomposite. This condition is caused by kenaf fibres with a length of 1 cm being more dispersed in the matrix than fibres with a length of 3 cm.

The Effect of Different Fibre Lengths on the Mechanical Properties of Biocomposites