English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Removal of suspended solids and microorganisms from an aerated lagoon effluent with a horizontal roughing filter (HRF) was investigated. The aerated lagoon receives Qom municipal wastewater. The HRF was operated at three filtration rates of 0.5, 1.0 and 1.5 m3/(m2·h) during four month operation period. The measured values of turbidity, TSS, COD, pH, temperature and flow rate of HRF at the former filtration rate were 79±12 NTU, 100±11 mg/dm3, 190±12 mg/dm3, 7±0.1 °C, 17±8 °C and 0.82 dm3/min, respectively. The differences between inlet and outlet values of pH and temperature were not significant (P > 0.05). Measures turbidity, TSS and COD in HRF final effluent were 15±13.7 NTU, 37±295 mg/dm3, 64±39.7 mg/dm3, respectively, which corresponds to 81.1%, 63% and 66.3% removal efficiencies, respectively. A decrease of removal efficiency was observed upon increasing filtration rates. The Spearman correlation coefficients between the head-loss and removal efficiencies ranged from 0.578 to 0.968 pointing to a direct relationship. Results of modeling approach revealed appropriate compliance between the values of the observed and predicted TSS for higher filtration rates.

Upgrading the effluent quality of an aerated lagoon with horizontal roughing filtration