English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

As a way of reusing and converting industrial by-products into useful materials for the construction industry, this paper investigated the application of Saw dust ash (SDA) as partial substitute for ordinary Portland cement (OPC) in the production of interlocking paving stones. The study examined the oxide composition of SDA to determine its suitability as a pozzolanic material. Some characteristics of paving stones with SDA as a substitute for OPC were investigated and the results indicated that SDA is a good pozzolan having satisfied the required standards. The compressive strength of the samples, with substitution levels ranging from 5 to 25% cured for 3–56 days, was lower at initial curing period but improved significantly at later days. 5% substitution level showed an increase in strength compared to 0% SDA paving stones regardless of curing period.  Density decreased with increasing ash content, whereas water absorption increased with SDA content. The study therefore indicated that SDA paving stones can gain higher strength than the conventional ones at longer curing periods, which is as a result of its pozzolanic reactions.

Application of Corn Husk Ash as Partial Replacement for Cement in the Production of Interlocking Paving Stones