English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Biological trickling filters are widely used for sewage treatment. This study models a biological trickling filter based on an anaerobic–anoxic–oxic process (A2O–BTF), established by a combination of aerobic and anaerobic technology. The performance and operational parameters were analyzed using Sumo, a commercially available wastewater treatment process (WWTP) simulation software. The wastewater treatment performance of the anaerobic–anoxic–oxic process biological trickling filter (A2O–BTF), the conventional three-stage biological trickling filter (Three-Stage–BTF), and the single-stage biological trickling filter (Single–BTF) was compared, which indicated the higher performance of A2O–BTF in terms of COD, TN, NH3-N, and TP removal. The operational parameters of A2O–BTF were optimized by Sumo simulation software, and the results showed that the removal efficiency of pollutants was increased by raising the temperature to the range of 13.94–21.60 °C. The dissolved oxygen (DO) in the aerobic reactor enhanced removal efficiency under a saturation concentration of 2.2–2.6 g O2/m3. In addition, the optimization of the reflux ratio promoted the removal efficiency of the pollutants, indicated by the maximum removal efficiency of COD and TN, achieved at the reflux ratio of 2.25, and that of NH3-N and TP, achieved at a reflux ratio of 0.75. This study provides a proof-in-concept demonstration that software modeling can be a useful tool for assisting the optimization of the design and operation of sewage treatment processes.

Modeling a Three-Stage Biological Trickling Filter Based on the A2O Process for Sewage Treatment