English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The design, simulation and experimental results of the integrated optical and electronic components for 25 Gb/s microwave photonic link based on a 0.25 µm SiGe:C BiCMOS technology process are presented. A symmetrical depletion-type Mach-Zehnder modulator (MZM) and driver amplifier are intended for electro-optical (E/O) integrated transmitters. The optical divider and combiner of MZM are designed based on the self-imaging theory and then simulated with EM software. In order to verify the correctness of the theory and material properties used in the simulation, a short test (prototype) MZM of 1.9 mm length is produced and measured. It shows an extinction ratio of 19 dB and half-wave voltage-length product of Vπ ∙ L = ~1.5 V·cm. Based on these results, the construction of the segmented modulator with several driver amplifier units is defined. The designed driver amplifier unit provides a bandwidth of more than 30 GHz, saturated output power of 6 dBm (output voltage of Vpp = 1.26 V), and matching better than −15 dB up to 35 GHz; it dissipates 170 mW of power and occupies an area of 0.4 × 0.38 mm2. The optical-electrical (O/E) receiver consists of a Ge-photodiode, transimpedance amplifier (TIA), and passive optical structures that are integrated on a single chip. The measured O/E 3 dB analog bandwidth of the integrated receiver is 22 GHz, and output matching is better than −15 dB up to 30 GHz, which makes the receiver suitable for 25 Gb/s links with intensity modulation. The receiver operates at 1.55 μm wavelength, uses 2.5 V and 3.3 V power supplies, dissipates 160 mW of power, and occupies an area of 1.46 × 0.85 mm2.

Microwave Photonic ICs for 25 Gb/s Optical Link Based on SiGe BiCMOS Technology