English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Mining can lead to overburden failure and ground damage, which are more severe in mining shallow buried thick coal seams (SBTCS) under thick aeolian sand (TAS). We attempted to discover characteristics of mining in this particular geological condition through theoretical derivation and numerical simulation, and field monitoring. Theoretical methods, combined with numerical simulation and field monitoring methods, reveal the essence of the development and distribution of surface cracks caused by mining SBTCS and depth to thickness ratio (DTR) to be 13.43, less than 15. The findings show that, when mining SBTCS, the overburden breaks down periodically, the initial collapse distance is greater than the collapse step, approximately 55 m on average, and the collapse step is approximately 45 m, on average, in the Daliuta Coal Mine. The collapsed blocks are stacked into goaf and form “masonry beams”, and many cracks and pores are generated between the blocks. The weak stress of the aeolian sand layer causes the movement angle in the aeolian sand layer to be smaller than that in the bedrock, and leads to much sheer, tension and compression failure on the ground, and the main forms of cracks are compression uplift, tensile cracking, shear step.

Characteristics of Overburden and Ground Failure in Mining of Shallow Buried Thick Coal Seams under Thick Aeolian Sand