English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Open

Poor lubrication performance of low-sulfur fuel leads to increased wear of diesel engine components. In order to improve the lubrication properties of low-sulfur fuel, we successfully prepared graphene lubricant additives by dielectric barrier discharge plasma-assisted ball milling. The tribological properties of graphene lubricant additives in two types of 0# diesel oils with different sulfur content were evaluated by high-frequency reciprocating rig (HFRR). The results indicated that the expanded graphite was exfoliated and refined into graphene sheets with nine layers by the synergistic effect of the heat explosive effect of the discharge plasma, the impact of mechanical milling function, and the cavitation effect of 0# diesel oil. The organic functional groups of 0# diesel oil were successfully grafted on the surface of graphene sheets. The addition of 0.03 wt % graphene resulted in 20% reduction in the friction coefficient (COF) and 28% reduction in wear scar diameter (WSD) compared to pure 0# diesel oil with a sulfur content of 310 mg/kg. The addition of 0.03 wt % graphene resulted in 24% reduction in the friction coefficient (COF) and 30% reduction in wear scar diameter (WSD) compared to pure 0# diesel oil with a sulfur content of 1.1 mg/kg. The formation of graphene tribofilm on rubbing surfaces improved the lubrication properties of low-sulfur fuel.

processes

Preparation and Tribological Properties of Graphene Lubricant Additives for Low-Sulfur Fuel by Dielectric Barrier Discharge Plasma-Assisted Ball Milling