English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

A one-dimensional (1D) simulation calculation model was created using GT-Power software to investigate the effect of an exhaust gas recirculation (EGR) in concert with the Miller cycle on engine fuel economy and using a 1.5 T gasoline direct injection (GDI) engine as the source engine. The engine was tested under partial loading, full loading, and declared working conditions. The results show that under partial load, the Miller cycle could improve engine fuel economy by reducing pumping losses. In the low-speed 1000 r/min full load region, the Miller cycle had a significant effect on increasing the engine fuel economy. When the Miller intensity was −29 °CA, the fuel consumption decreased by a maximum of 10.5%. At medium speeds, 2000 r/min to 3600 r/min, the Miller cycle did not improve fuel economy significantly. For the Miller cycle with late intake valve closure (LIVC), when the EGR rate was about 7%, the fuel consumption was reduced by about 1.3% compared with the original engine at the same EGR rate. When opposed to the original engine without EGR, the fuel consumption was lowered by approximately 3.2 percent.

Simulation Analysis of Fuel Economy of the GDI Engine with a Miller Cycle and EGR Based on GT-Power