English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

Stainless steel slag has been applied to other silicate materials due to its CaO-SiO2-based system. This is done to improve the utilization rate of stainless steel slag and apply it more safely. This paper investigated the occurrence of chromium in synthetic stainless steel slag containing FetO and its leaching behavior. The phase composition of the equilibrium reaction was calculated by FactSage 7.3 Equlib module. XRD, SEM-EDS and IPP 6.0 were used to investigate the phase compositions, microstructure and count the size of spinel crystals. The results indicate that the increase of Fe2O3 content can promote the precipitation of spinel phases and effectively inhibit the formation and precipitation of α-C2S in a CaO-SiO2-MgO-Cr2O3-Al2O3-FeO system. Fe2O3 contents increased from 2 wt% to 12 wt%, and the crystal size increased from 4.01 μm to 6.06 μm, with a growing rate of 51.12%. The results of SEM line scanning show the Cr-rich center and Fe-rich edge structure of the spinel phase. Comparing the TRGS 613 standard with the HJ/T 299-2007 standard, the leaching of Cr6+ in the FetO samples is far lower than the standards’ limit, and the minimum concentration is 0.00791 mg/L in 12 wt% Fe2O3 samples.

Occurrence and Leaching Behavior of Chromium in Synthetic Stainless Steel Slag Containing FetO