English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

Nanometer-sized precipitated carbides in a low carbon Ti-V-Mo bearing steel were obtained through hot rolling and air cooling and were investigated by transmission electron microscopy (TEM). The nanometer-sized interphase-precipitated carbides have been found to exhibit an average diameter of ~6.1 ± 2.7 nm, with an average spacing of ~24–34 nm. Yield strength of 578 ± 20 MPa and tensile strength of 813 ± 25 MPa were achieved with high elongation of 25.0 ± 0.5% at room temperature. The nanometer-sized precipitation exhibited high stability after annealing at high temperatures of 600 ◦C and 650 ◦C for 3 h. Average diameters of carbides were statistically measured to be ~6.9 ± 2.3 nm and 8.4 ± 2.6 nm after tempering at high temperatures of 600 ◦C and 650 ◦C, respectively. The micro-hardness was ~263–268 HV0.1 after high temperature tempering, which was similar to the hot-rolled sample (273 HV0.1), and yield strength of 325 ± 13 MPa and 278 ± 4 MPa was achieved at elevated temperatures of 600 ◦C and 650 ◦C, respectively. The significant decrease of yield strength at 650 ◦C was attributed to the large decrease in shear modulus.

Study of Nanometer-Sized Precipitation and Properties of Fire Resistant Hot-Rolled Steel