English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Tools annual

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Presents the access of premium content as premium feature

Premium Content

Global: Zendy Plus annual

Global: Zendy Free Plan

Although a cobalt–chromium (Co–Cr) blank in a pre-sintered state has been developed, there are few data on the optimal temperature for the alloy in terms of the desired mechanical properties. A metal block (Soft Metal, LHK, Chilgok, Korea) was milled to produce either disc-shaped or dumbbell-shaped specimens. All the milled specimens were post-sintered in a furnace at 1250, 1350 or 1450 °C. The microstructures, shrinkage and density of the three different alloys were investigated using the disc-shaped specimens. The mechanical properties were investigated with a tensile test according to ISO 22674 (n = 6). The number and size of the pores in the alloys decreased with increased temperature. The shrinkage and density of the alloys increased with temperature. In the 1250 °C alloy, the formation of the ε (hexagonal close-packed) phase was more predominant than that of the γ (face-centered cubic) phase. The 1350 °C and 1450 °C alloys showed γ phase formation more predominantly. Carbide formation was increased along with temperature. The 1450 °C group showed the largest grain size among the three groups. In general, the 1350 °C group exhibited mechanical properties superior to the 1250 °C and 1450 °C groups. These findings suggest that 1350 °C was the most optimal post-sintering temperature for the pre-sintered blank.

Effect of Different Post-Sintering Temperatures on the Microstructures and Mechanical Properties of a Pre-Sintered Co–Cr Alloy