English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Tools annual

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Presents the access of premium content as premium feature

Premium Content

Global: Zendy Plus annual

Global: Zendy Free Plan

The influence of welding heat input on the microstructure and mechanical properties of 5Cr5MoV die steel was studied in order to improve the mechanical properties of the cold working die and extend its service life. Shielded metal arc welding (SMAW) method was used with different heat inputs in the range from 4.2 to 6.61 kJ/cm to repair the 5Cr5MoV die steel. Microhardness and tensile properties were performed to evaluate the repaired quality of the cold working die steel. The microhardness of the weld repaired zone gradually decreased from the weld to the tempering zone. The highest microhardness in the weld repaired zone was 863 HV, and finally, it decreased to about 300 HV. With the increase of heat input, the tensile strength of the weld and the heat affected zone increased; nevertheless, the tensile strength of the tempering zone increased first and then decreased. As a result, 6.6 kJ/cm is the best value of heat input judged from the microhardness distribution and the tensile properties.

Optimizing the Mechanical Properties in the Repair Zone of 5Cr5MoV by Controlling Welding Heat Input