English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The surface hardening and softening behavior of two types of medium carbon martensitic steel (AISI P20-improved and AISI P21) after laser-assisted heat treatment was quantitatively compared. The laser-assisted heat treatment was performed using a high-power diode laser with in situ temperature and laser power control (two-color pyrometer system). For AISI P20-improved steel, the peak hardness value within the hardening zone was approximately 640 HV after laser-assisted heat treatment at a temperature of 1473 K. In other words, the hardness increased by 120% from the base metal level (290 HV). However, for AISI P21 steel, the hardness within the heat-treated zone did not change from that of the base metal (410 HV), despite being accompanied by martensite transformation. Moreover, it was clearly observed that the hardness dropped below the level of the base metal at the boundary between the heat-treated zone and the base metal region, forming a softening zone. This softening behavior was strongly related to coarsening and a looser distribution of Cu precipitates compared with that of the base metal region, despite the same matrix phase (i.e., tempered martensite) existing in the softening zone and in the base metal region.

Microstructural Characterization of Surface Softening Behavior for Cu-Bearing Martensitic Steels after Laser Surface Heat Treatment