English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

To further improve the comprehensive performance of Mg-based alloy, hot extrusion combined with multi-pass equal channel angular pressing (ECAP) was applied to process Mg-3 wt%Zn-0.2 wt%Ca alloy and 1 wt%β-TCP/Mg-3 wt%Zn-0.2 wt%Ca biocomposites. The microstructure evolution, mechanical properties, corrosion behavior, and cell biocompatibility of the experimental specimens were systematically investigated. The average grain size of 13.4 ± 0.6 μm in MgZnCa alloy and 9.6 ± 0.3 μm in composites materials can be achieved by six ECAP passes. The uniaxial compressive strength (UCS) of 388.4 ± 7.3 MPa and the strain at failure of 14.3 ± 1.5% were confirmed in MgZnCa alloy, while the UCS of 405.3 ± 7.4 MPa and the strain at failure of 9.8 ± 1.9% were achieved by the addition of β-TCP after six ECAP passes. In spite of different compositions, the minimum corrosion rate of 0.895 mm·Y−1 and 1.117 mm·Y−1 can be achieved by two ECAP passes at 593 K. The cytocompatibility evaluation revealed that the experimental materials processed by six ECAP passes had no significant cytotoxicity to L929 cells, and the addition of β-TCP improved the cytocompatibility.

Microstructure Evolution and Properties of β-TCP/Mg-Zn-Ca Biocomposite Processed by Hot Extrusion Combined with Multi-Pass ECAP