English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Samples of 17-4PH high-strength steel were processed by selective laser melting (SLM) and solution-processed. The effects of the solution temperature on the microstructure and mechanical properties of the samples were studied. The 17-4PH high-strength steel is primarily composed of martensite, with a small number of austenite phases, and contains many dislocations. After the solution treatment, the grain size gradually increased, yielding typical martensite. The samples were subjected to an aging treatment after the solution treatment. Precipitates formed in the samples, conducive to improving their strength and hardness. The Vickers hardening and wear properties of the 17-4PH high-strength steel samples first increased and then decreased with increasing solution temperature. After the solution treatment at 1040 °C for 2 h and aging at 480 °C for 4 h, the Vickers hardening of the 17-4PH high-strength steel increased to 392 HV0.5, and the friction coefficient was approximately 0.6. These values were, respectively, 7% and 5% higher than those for the untreated samples.

Effect of Solution Temperature on the Microstructure and Properties of 17-4PH High-Strength Steel Samples Formed by Selective Laser Melting