English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

Three air-hardening forging steels are presented, concerning their microstructure and their mechanical properties. The materials have been produced industrially and achieve either bainitic or martensitic microstructures by air-cooling directly from the forging heat. The bainitic steels are rather conservative steel concepts with an overall alloy concentration of approximately 3 wt.%, while the martensitic concept is alloyed with 4 wt.% manganese (and additional elements), and therefore belongs to the recently developed steel class of medium manganese steels. The presented materials achieve high strengths (YS: 720 MPa to 850 MPa, UTS: 1055 MPa to 1350 MPa), good elongations (Au: 4.0% to 5.9%, At: 12.3% to 14.9%), and impact toughnesses (up to 37 J) in the air-hardened condition. It is shown that air-hardened steels achieve properties close to standard Q + T steels, while being produced with a significantly reduced heat treatment.

Air-Hardening Die-Forged Con-Rods—Achievable Mechanical Properties of Bainitic and Martensitic Concepts