English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The nucleation kinetics and morphology of Cu6Sn5 IMCs at the interface between a Sn-0.7Cu-0.2Cr solder and Cu substrate were investigated in this study. A Sn-0.7Cu solder was utilized as a reference to elucidate the impact of Cr addition. The mechanical properties of the solder joints were determined via ball-shear tests. Cu coupons were dipped in the molten solders for 1 and 3 s at 240–300 °C, and the morphological analyses were conducted via electron microscopy. Both the solders contained scallop-like Cu6Sn5 IMCs. The smallest Cu6Sn5 IMCs were observed at 260 °C in both the solders, and the particle size increased at 280 and 300 °C. The IMCs in the Sn-0.7Cu-0.2Cr solder were smaller and thinner than those in the Sn-0.7Cu solder at all the reaction temperatures. The thickness of the IMCs increased as the reaction temperature increased. Inverse C-type nucleation curves were obtained, and the maximum nucleation rate was observed at an intermediate temperature. The shear strengths of the Sn-0.7Cu-0.2Cr solder joints were higher than those of the Sn-0.7Cu solder joints. This study will facilitate the application of lead-free solders, such as Sn-0.7Cu-0.2Cr, in automotive electrical components.

Nucleation and Morphology of Cu6Sn5 Intermetallic at the Interface between Molten Sn-0.7Cu-0.2Cr Solder and Cu Substrate