English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

The effect of different precipitate microstructures obtained by different heat treatments on fatigue behavior of 7020 aluminum alloy was investigated. The fine Guinier Preston I (GPI) zones in the under-aged alloy can be repeatedly sheared by dislocations produced in cyclic loading, making the fatigue crack initiate difficultly and fatigue crack path propagate tortuously. Fatigue strength and fatigue crack propagation resistance of the alloy with shearable precipitates are much higher than those of the alloy with unshearable precipitates. The peak-aged alloy with continuous grain boundary precipitate (GBP) and narrow precipitate free zone (PFZ) is prone to initiate fatigue cracks and reduce fatigue strength. With the growth of unshearable precipitates, the fatigue strength of the alloy firstly increases and then decreases. Precipitates with moderate size in the over-aged alloy improve the roughness-induced crack closure (RICC) effect. Soft matrix with appropriate width between the precipitates can promote the slip reversibility and relax the crack tip stress. The fatigue strength of the moderately over-aged alloy reaches to 122.1 MPa at 10 7 cycles of loading, and the fatigue crack growth rate (FCGR) is 35.6% slower than that of the peak-aged alloy at Δ K of 10 MPa·m 1/2 .

Mechanism of Precipitate Microstructure Affecting Fatigue Behavior of 7020 Aluminum Alloy