English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

HfO 2 was deposited at 80-250 °C by plasma-enhanced atomic layer deposition (PEALD), and properties were compared with those obtained by using thermal atomic layer deposition (thermal ALD). The ALD window, i.e., the region where the growth per cycle (GPC) is constant, shifted from high temperatures (150-200 °C) to lower temperatures (80-150 °C) in PEALD. HfO 2 deposited at 80 °C by PEALD showed higher density (8.1 g/cm 3 ) than those deposited by thermal ALD (5.3 g/cm 3 ) and a smooth surface (RMS Roughness: 0.2 nm). HfO 2 deposited at a low temperature by PEALD showed decreased contaminants compared to thermal ALD deposited HfO 2 . Values of refractive indices and optical band gap of HfO 2 deposited at 80 °C by PEALD (1.9, 5.6 eV) were higher than those obtained by using thermal ALD (1.7, 5.1 eV). Transparency of HfO 2 deposited at 80 °C by PEALD on polyethylene terephthalate (PET) was high (&gt; 84%). PET deposited above 80 °C was unable to withstand heat and showed deformation. HfO 2 deposited at 80 °C by PEALD showed decreased leakage current from 1.4 × 10 -2 to 2.5 × 10 -5 A/cm 2 and increased capacitance of approximately 21% compared to HfO 2 using thermal ALD. Consequently, HfO 2 deposited at a low temperature by PEALD showed improved properties compared to HfO 2 deposited by thermal ALD.

Structural, Optical and Electrical Properties of HfO2 Thin Films Deposited at Low-Temperature Using Plasma-Enhanced Atomic Layer Deposition