English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Nb-silicide-based alloys have the potential to replace Ni-based superalloys in future aero engines to enable the latter to meet environmental and performance targets. These new alloys, like the Ni-based superalloys that are currently used, will require environmental protection with a coating system that should be chemically compatible with the substrate. A challenge for alloy development is to discover αAl 2 O 3 scale forming coating alloys and in particular to find out whether such alloys could be "compatible" with other coating alloys for environmental coating systems for the Nb-silicide-based alloys. This paper focuses on these challenges. The alloy Al-25.5Nb-6Cr-0.5Hf (at %) was studied in the cast and heat-treated (1400 °C) conditions and after isothermal oxidation for 100 h in air at 800, 1200 and 1300 °C. The microstructure consisted of the alloyed NbAl 3 and C14-NbCr 2 compounds, both of which were stable at least up to 1400 °C, a eutectic of the two compounds and very small volume fractions of (Cr,Al,Nb) ss and HfO 2 . The prior eutectic microstructure was stable at T ≤ 1200 °C and the solid solution was not stable at T &lt; 1200 °C. At 800 °C the alloy did not pest, but exhibited external and internal oxidation, with AlNbO 4 , CrNbAlO 4 , and αAl 2 O 3 in the former and deeper oxidation along the NbAl 3 /Laves phase boundaries in the latter At 1200 and 1300 °C there was only external oxidation and the scale consisted of two layers, the outer was (Al,Cr)NbO 4 intermixed with αAl 2 O 3 and the inner was continuous αAl 2 O 3 . At all three oxidation temperatures, no Nb 2 Al was observed below the alloy/scale interface and Hf acted as a reactive element forming HfO 2 that enhanced the adhesion of the scale. The alloy exhibited good correlations with αAl 2 O 3 scale forming silicide and silicide + aluminide intermetallic alloys in maps of the parameters (related to atomic size), (related to electronegativity), and VEC (number of valence electrons per atom filled into the valence band) that should assist the design of bond coats that do not pest and form αAl 2 O 3 in their scales.

On the Microstructure and Isothermal Oxidation at 800, 1200, and 1300 °C of the Al-25.5Nb-6Cr-0.5Hf (at %) Alloy