English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

This paper presents an investigation on the effect of fire intensity of a wind driven surface fire, similar to a large wildfire, on an idealized structure located downstream from the fire source. A numerical simulation was conducted using an open source CFD code called FireFOAM, which is a transient solver for fire simulation and turbulent diffusion flames, supported by a large eddy simulation (LES) solver for incompressible flow. The numerical data were verified using the aerodynamic experimental data of a full-scale building model with no fire effects. An idealized cubic obstacle representing a simplified building with the dimension of 6 × 6 × 6 m; is considered downstream from the fire source. Different fire intensity values of the fire line representing different grassland fuels were simulated to analyse the impact of wind-fire interaction on a built area. To solve the problem, a coupled velocity and pressure method was applied through a PIMPLE scheme in FireFoam solver of OpenFoam platform. There is a good agreement between simulated results and experimental measurements with a maximum error of 18%, which confirms the validity and accuracy of the model. The results showed that by increasing the fire intensity; the velocity of the crosswind stream increases, which causes low-density air and generates an extra stream behind the fire plume. It was also found that increasing fire intensity from 10 MW/m to 18 MW/m raises the integrated temperature on the ground near the building and on the surface of the building by 26%, and 69%, respectively.

Numerical Simulation of the Effect of Fire Intensity on Wind Driven Surface Fire and Its Impact on an Idealized Building