English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The application of secondary NOx control methods in medium to low-capacity furnaces is a relatively new topic on the energy market and thus requires further research. In this paper, the results of full-scale research of SNCR and hybrid SNCR + SCR methods applied into a 29 MWth solid fuel fired stoker boiler is presented. The tests were performed for a full range of boiler loads, from 33% (12 MWth) to 103% (30 MWth) of nominal load. A novel SNCR + SCR hybrid process was demonstrated based on an enhanced in-furnace SNCR installation coupled with TiO2-WO3-V2O5 catalyst, which provides extra NOx reduction and works as an excess NH3 “catcher” as well. The performance of a brand-new catalyst was evaluated in comparison to a recovered one. The emission of NOx was reduced below 180 mg NOx/Nm3 at 6% O2, with ammonia slip in flue gas below 10 mg/Nm3. Special attention was paid to the analysis of ammonia slip in combustion products: flue gas and fly ash. An innovative and cost-effective method of ammonia removal from fly ash was presented and tested. The main idea of this method is fly ash recirculation onto the grate. As a result, ammonia content in fly ash was reduced to a level below 6.1 mg/kg.

Combined NOx and NH3 Slip Reduction in a Stoker Boiler Equipped with the Hybrid SNCR + SCR System FJBS+